![Forrest logo](/images/logo.png)
gnmic-set:tldr:695bf
gnmic-set: Replace the value of a path to match the contents of a json file.
$ gnmic -a ${ip:port} set --replace-path ${path} --replace-file ${filepath}
try on your machine
The command "gnmic -a ${ip:port} set --replace-path ${path} --replace-file ${filepath}" is using the gnmic
tool to send a "set" request to a specific IP address and port.
Here's a breakdown of the different components in the command:
gnmic
: This is the name of the tool or command being executed.-a ${ip:port}
: This specifies the target IP address and port to which the request will be sent. The${ip:port}
part is most likely a placeholder that needs to be replaced with the actual IP address and port.set
: This keyword indicates that the request being sent is a "set" request. It's one of the common operations in many network management protocols to modify or update the configuration or state of a device.--replace-path ${path}
: This specifies the path or location where the configuration or state change needs to be applied. The${path}
part is likely another placeholder that should be replaced with the actual path.--replace-file ${filepath}
: This indicates that the new configuration or state information will be provided in a file. The${filepath}
part is again a placeholder that should be replaced with the actual file path.
Overall, this command is used to send a "set" request to a specific IP address and port, with the intention of replacing the configuration or state at a specific path with the contents of a file.
This explanation was created by an AI. In most cases those are correct. But please always be careful and
never run a command you are not sure if it is safe.