back to the sshuttle tool

sshuttle:tldr:4fa13

sshuttle: Forward all IPv4 TCP traffic via a remote SSH server.

sshuttle

$ sshuttle --remote=${username}@${sshserver} ${0-0-0-0-0}

try on your machine

The command you provided is using the sshuttle tool to establish a VPN-like connection to a remote SSH server.

Here is the breakdown of the command:

sshuttle: The name of the tool or command being executed.
--remote=${username}@${sshserver}: This specifies the remote SSH server you want to connect to. ${username} should be replaced with the actual username, and ${sshserver} should be replaced with the server's IP address or domain name. This parameter allows you to specify the remote server you want to tunnel traffic through.
${0-0-0-0-0}: This parameter specifies the IP address range to tunnel through the SSH server. In this case, the value 0-0-0-0-0 could represent all IP addresses, which means all network traffic will be tunnelled through the remote server. By routing all traffic through the SSH tunnel, you can encrypt and secure your connection, protecting your data from potential eavesdropping or tampering.

So, this command effectively sets up a VPN-like connection using SSH, routing all network traffic through the remote SSH server specified.

This explanation was created by an AI. In most cases those are correct. But please always be careful and never run a command you are not sure if it is safe.

back to the sshuttle tool