termdown:tldr:4982d
termdown: Start a 1 minute 30 seconds countdown with blinking the terminal at the end.
$ termdown ${1m30s} --blink
try on your machine
The command "termdown ${1m30s} --blink" utilizes the termdown tool to display a countdown timer in the terminal.
Here's how the command works:
- "termdown" is the name of the tool or command that is being executed. It is likely a separate command-line program that provides countdown timer functionality.
- "${1m30s}" is an argument passed to the termdown command. It represents the duration for which the countdown timer will run. In this case, it is set to 1 minute and 30 seconds.
- "--blink" is an additional option or flag provided to the termdown command. It specifies that the countdown timer should blink or flash on the screen as it runs.
Overall, the command will initiate the termdown tool with a countdown duration of 1 minute and 30 seconds, and the timer will blink or flash on the terminal display.
This explanation was created by an AI. In most cases those are correct. But please always be careful and
never run a command you are not sure if it is safe.