tftp:tldr:e0a27

tftp: Connect to a TFTP server and execute a TFTP [c]ommand.

tftp

$ tftp ${server_ip} -c ${command}

try on your machine

This is a command in the TFTP (Trivial File Transfer Protocol) client that allows you to interact with a TFTP server by sending a specific command.

Here's a breakdown of the command:

tftp: This is the command to start the TFTP client.
${server_ip}: This is a placeholder for the IP address or hostname of the TFTP server you want to connect to. You need to replace ${server_ip} with the actual IP address or hostname of the server.
-c: This option is used to specify the command you want to send to the TFTP server.
${command}: This is a placeholder for the command you want to send to the TFTP server. You need to replace ${command} with the actual command you want to execute on the server.

For example, if you want to send the command "get myfile.txt" to a TFTP server with the IP address 192.168.1.100, the complete command would look like this:

tftp 192.168.1.100 -c get myfile.txt

This command would initiate a connection to the TFTP server at 192.168.1.100 and request the file myfile.txt from the server.

This explanation was created by an AI. In most cases those are correct. But please always be careful and never run a command you are not sure if it is safe.

back to the tftp tool