![Forrest logo](/images/logo.png)
lspath:tldr:15a13
lspath: Print the contents of the system PATH variable, with one element per line.
$ lspath
try on your machine
The "lspath" command is used in the context of storage management in IBM AIX operating system. It displays the paths available to access a particular logical storage volume or disk device. It can be used to retrieve information about the path status, location, and priority of available paths.
Here is the breakdown of the command:
- "lspath": This is the actual command that is executed in the command-line interface.
- The command provides information about the paths available for accessing logical storage volumes or disk devices on the system.
When executed, the "lspath" command retrieves and displays the following information for each available path:
- Path ID: A unique identifier for the specific path.
- Path Status: Indicates if the path is enabled (usable) or disabled (unusable).
- Path Location: Represents the physical location of the path, such as a specific network adapter or bus.
- Path Type: Specifies the type of the path, such as FC (Fiber Channel), SAS (Serial Attached SCSI), or VSCSI (Virtual SCSI).
- Path Priority: Indicates the priority of the path in relation to other available paths.
By analyzing the output of "lspath" command, system administrators can assess the health and availability of various paths to storage volumes or disk devices, allowing them to diagnose and troubleshoot any issues with the storage subsystem or optimize the path configuration for performance and redundancy.
This explanation was created by an AI. In most cases those are correct. But please always be careful and
never run a command you are not sure if it is safe.